Selektro CCM 164 User Manual Download Page 5

Page: 5 / 55

CCM 164

–

User Manual

–

GB / UK

Description of the control lamps, buttons and SIM card

Control lamps

STATU

Constantly on

off

Module recently connected to the power
supply and backup battery is charging.

Slow long flashing

off

Module is initializing.

Slow flashing

off

Module is ready and everything is OK.

Quick flashing

off

There is an error. Refer to MODEM STATUS.

50% on
50% flashing

off

EEPROM Error.

Turned off

off

No supply voltage. If MODEM STATUS is
flashing the module is using the backup.

NET

STATU

Slow flashing

off

MODEM is operational.

Fast flashing

off

Network not accessible.

Turned off

off

MODEM is turned off.

MODEM

STATU

Slow long flashing

off

MODEM is initializing.

Slow short flashing

off

Module is using backup. MODEM STATUS
LED is turned off.

Slow flashing

off

MODEM is ready with NET connection.

Two quick flashes

off

SIM card error.

Quick flashing

off

GSM network error.

Turned off

off

MODEM is turned off.

50% on/off flashing

off

Modem transmitting

NET STATUS

Flashes when the

MODEM is powered

ON.

OUTPUTS

Displays levels for the

4 relay outputs.

MODE

Used for confirmations

and unlocking.

SIM card

Refer to

“

0 SIM card

”

Remember that the

card must

not

have a

PIN code.

STATUS

Flashes slowly when all

is OK. Flashes quickly

when the unit starts or

if there is an error. For
further details refer to

the table below.

MODEM STATUS

Flashes slowly when

the MODEM is ready.

For further details refer

to the table below.

INPUTS

Displays the digital value of

the 6 combined digital and

analog inputs.

Summary of Contents for CCM 164
























































Search results

Summary of Contents for CCM 164

Reviews:

Brands by name

Popular brands

Selektro CCM 164, User Manual

Search results

Summary of Contents for CCM 164

Reviews:

Brands by name

Popular brands