Selectronic SP PRO, Instruction Manual

Page: 73 / 76

SERVICE | Appendix A - Specifications
Doc #OI0003 Part #004122 Rev19 2014
|
73
SP PRO SERIES SPECIFICATIONS SPMC240 SPMC241 SPMC481 SPMC482 SPMC1201 SPLC1200 SPLC1202
Nominal batter voltage 24 V 24 V 48 V 48 V 120 V 120 V 120 V
Continuous, output power
Continuous, charge current
@ 25°C
3,000 W
125 A
4,500 W
188 A
5,000 W
104 A
7,500 W
156 A
7,500 W
63 A
15,000 W
125 A
20,000 W
167 A
Continuous grid export power rated output
20 second load rating
20 second output current
@ 40°C
7,500 W
28 A
10,500 W
40 A
12,000 W
47 A
18,000 W
70 A
18,000 W
70 A
33,000 W
135 A
44,000 W
180 A
1 minute output power @ 40°C 5,400 W 7,600 W 8,700 W 13,000 W 13,000 W 26,000 W 35,000 W
60 minute output power @ 40°C 3,200 W 4,700 W 5,300 W 8,000 W 8,000 W 18,000 W 24,000 W
DC input voltage range 20 - 34 V 20 - 34 V 40 - 68 V 40 - 68 V 100 - 170 V 100 - 170 V 100 - 170 V
TRANSFER SWITCH (Synchronous)
AC transfer current capacity 63 A 125 A 125 A
Max AC input source, (generator/grid) 15 kVA 30 kVA 30 kVA
Max total output to Load, AC inverter 15 kVA 30 kVA 30 kVA
AC transfer time no-break
If grid fails 0 - 0.03 seconds
Battery charger type Temperature compensated, 5 stage, power factor corrected with dual stage float
EFFICIENCy
DC consumption idle 6 W
DC consumption standby (Econo Mode) 12 - 20 W n/a
ON with no load 25 W 33 W 35 W 43 W 43 W 89 W 90 W
Peak efficiency – all modes 95% 95% 95.5% 96% 96.5% 97.2% 97.2%
10% load 90% 90.5% 91% 91% 91.5% 93.3% 94.8%
20% load 92.5% 93% 94% 94% 94% 95.8% 96.8%
50% load 94% 94.5% 95% 95.5% 96% 97.2% 97.1%
100% load 90% 91% 92.5% 93% 93.5% 96.8% 95.5%
AC OUTPUT (standalone)
Range 210 to 240 V +/- 0.5%
Regulation <1% droop 0-100% rated load (<2% @ 150%, <5% @200%)
THD <3% @ 0-200% rated load
Frequency 50 or 60 Hz +/-0.005% standalone
AC SOURCE (input)
Nominal voltage 240 V~
AC current (Recharge, Bypass & Normal
modes)
63 A 125 A 125 A
Tolerance on nominal voltage Configurable 204 to 264 V~
Nominal input frequency 50/60 Hz
Tolerance on nominal frequency Config/- 1% to 10%
Generator can be started by Battery SoC, DC voltage, battery load, unit temperature, time & remote control
FEATURES
Battery temperature sensor Included
Mid point battery voltage sensing Included
Front panel display and controls 22 x LED indicators with auto adjusting intensity.
Display indicates, charger status, remaining usable battery capacity, alarms, AC status.
AC status indicators powered from AC voltage.
Generator control button. On button. Silence Alarm button.
Digital Inputs 4 of: Max 60 V DC ( Active > +10 V, Inactive < +3 V )
Shunt Inputs 2 of: +/-75 mV, adjustable 25 A to 500 A
Analogue Inputs 2 general purpose logged 0-60 V n/a
Relay Outputs 4 of: 60 V, 500 mA
Digital outputs 3 of: 60 V, 5 mA
Communication ports USB and RS232 (optional Wireless and Ethernet)
Memory retention of settings & data Permanent
SP LINK configuration and monitoring software Standard, allows configuration of parameters and monitoring of parameters and SP PRO display remotely.
Dimensions (mounted) W x H x D 375 x 690 x 220
540 x 870
x 293
540 x 870
x 293
Weight (with wall mount) 35 kg 39 kg 40 kg 42 kg 42 kg 113 kg 115 kg
Standards IEC 62040-1-1:2002 / AS 62040.1.1-2003 with CB certificate
AS/NZS 61000-6-3 2007 AS/NZS 61000-6-4 2007
Grid Protection AS 4777.2 2005 and AS 4777.3 2005
Protection IP43