8
400 S: One short connecting plate for each
2400 mm (94 1/2”) luff extrusion
400 S: One long connecting plate
(for sail feeder)
500 S: One short connecting plate for each
4800 mm (189”) luff extrusion
Tools needed for assembly:
Screwdriver (standard tip)
Screwdriver for 1/4”
Hacksaw
2 adjustable spanners
Pair of pliers (“Polygrip”)
Adhesive tape
File
Marker pen (water-proof)
Torx bits (included in Furlex package)
Allen keys (included in Furlex package)
Steel measuring tape (30 m) (100”)
Knife
Allen keys 8 (5/16”) and 10 mm (3/8”)
2.3 Tools
One 1000 mm (39 3/8”) luff extrusion with
long joining sleeve
+ bearing plug with bushes
400 S: One 1700 mm (67”) luff extrusion
with distance tube.
500 S: One 2000 mm (78 3/4”) luff
extrusion with distance tube.
400 S: 2400 mm (94 1/2”) luff extrusions
with distance tube + joining sleeve (number
dependent on length ordered.)
500 S: 4800 mm (189”) luff extrusions with
distance tube + joining sleeve (number
dependent on length ordered.)
400 S: Sail feeder
(Sail sailfeeder connector.)
500 S: The sail feeder is cut into the 1000
mm luff extrusion on this model.
2.2 Foil pack
400 S:
For halyard leads:
Heavy-duty Philips screwdriver
Drill
Drill bit Ø 5.3 mm (7/32”)
(included in package)
