47
Press on the sail feeder connector from the front
of the luff extrusion. Clip the sail feeder into the
top edge.
Press the clips of the bottom part in so that these
snap firmly into the sailfeeder connector’s seat.
17.3 Lineguide
1. Unwind all the line from the line drum. Note the number of turns of line (for reassembly).
Loosen screws
and slacken screw
off a
few turns.
Lower the line guide fitting, remove it, and
slide out the locking block.
4. Remove the line drum housing from the line drum.
Fig. 17.3.b
Fig. 17.3.a
Fig. 17.2.d
Fig. 17.2.e
Re-installing the sail feeder:
3
2
2.
3.
4.
5.
1
2
