iii
NOTICE
● Check if L-858D firmware is the latest version by using "Update Settings" function of
Data Transfer Software connected with L-858D.
● Download the Data Transfer Software from www.sekonic.com, and install it on your
computer.
URL:
https://www.sekonic.com/support/downloads/dtssoftwareformacandwindows.aspx
To use this software, connect your computer to the L-858D using a USB cable (micro-B
type, available commercially).
■
Intended Use
This product can be used in the following situations.
●
Radio wave-based flash light triggering or output power control
●
Radio wave-based modeling lamp ON/OFF
■
Intended Users
The intended users of this product are those who are engaged in shooting or related
businesses, such as photographers, who use the flash units.
■
Disclaimer
The Company shall not be liable for any direct or indirect damage resulting from the
failure of this product or its use.
