26
2. About broncolor Radio System
●
NOTE
● For red-eye prevention and auto-flash light adjustment, some devices can pre-flash before
main flash burst. With the normal setting, the light meter will measure the pre-flash bursts and
not the main flash burst. To take a successful reading, activate the pre-flash feature in the
Tool Box. Please refer to the L-858D Operating Manual.
● When the measured value display area is touched, both flash waveform graph and measured
value are displayed. When it is touched again, the display returns to the previous screen.
● Measure the flash light characteristics in a darkroom without ambient light.
●
For radio frequencies, refer to “5. Radio Studio Address Frequencies”. (
[Measuring Screen]
[Flash Duration Analysis Mode
Flash Waveform Graph Screen]
Touching the
Measured
value area
changes the
display.
*
The graph screen cannot be used to make measurements.
