28
2. About broncolor Radio System
●
5.
Press the Measuring Button
6
.
The flashes in the same Studio Address will fire, and the measured value (F-stop)
will be displayed.
The measured value (F-stop) is displayed in the main display and the Lamp Address
display over the selected Lamp Address in the Flash Power Control Screen.
6.
Touch [+]
or [-]
Button.
Touching the [+] or [-] Button will increase or decrease the power of the flash in 0.1
step for the selected Lamp Address. When holding the button longer (1 second),
the power will be adjusted in 1 (full) step.
The adjusted value will be displayed in the Adjusted Value area.
NOTICE
● The first flash triggered by light meter is the output power set in the flash units.
● Although up to +/-9.9 steps can be set, the adjustment must be within the upper and
lower limit of the power level specification of the flash unit.
●
The adjusted value will be reset to “0” when a new measurement is made, another Lamp
Address is selected, or the power is turned ON/OFF.
[Flash Power Control
Screen]
Measured Value
(F-stop)
Lamp Address Display
Main Display
[Flash Power Control
Screen]
[+] Button
[-] Button
Adjusted Value
