background image

-28-

INTERNATIONAL WARRANTY

Except as set forth in this Three (3) Year International Warranty, Seiler Instrument Company (“SIC”) hereby  
warrants that each Seiler microscope product  manufactured and/or sold by SIC shall be free from defects in 
materials and workmanship under normal use and service for three years.  International Warranty includes 
mechanics, optics, and hardware (such as casters, knobs, tension band).  This warranty is non-transferable and 
is valid only with respect to the original  purchaser of the product.  SIC obligation under this warranty shall 
be  limited to repairing or replacing, at SIC facility and at SIC expense, any parts or components which are  
demonstrated to be defective.  The  purchaser shall be responsible for shipment of the product to SIC facility 
at 3433 Tree Court Industrial Blvd., St. Louis MO 63122, Attention: Micro Product Department, or such other 
facility as SIC may otherwise designate.  Under certain  circumstances which are pre-approved by SIC, necessary 
repairs may be made at the  purchaser’s facility.  A return authorization is required before returning any product 
for warranty service by calling 1-800-489-2282  x347.

This warranty shall not apply to electronic and electrical components of the  microscope or accessories such as 
video equipment, monitors and laptop which carry a three (3) year warranty OR any  components which are  

consumable or are required to be replaced or disposed of in normal use of the product, such as lamps,  fiber-

optic cables and rubber eye cups OR any product which was purchased prior to April 29, 2016. 

This warranty shall be void and of no effect: (1) if the product is damaged due to  misuse, use in a manner 
other than pursuant to the instruction for the use of the  product, abuse, physical mishandling or natural causes 

such as flood, fire,  earthquake or other perils, as determined by SIC, or (2) if any repairs are made by persons 

unauthorized by SIC to perform such  services.

The warranties set forth here are in lieu of any and all other warranties expressed or implied,  including,  without 

limitation, warranties of  merchantability and fitness for a particular purpose.  Purchaser’s rights  thereunder are 

granted in lieu of any other rights purchaser may have and purchaser hereby waives all other rights,  warranties, 
remedies or guarantees whatsoever with respect to the product.   
SIC shall not be liable for any  reason to any third parties in respect of the product or its performance.  Further, 
SIC shall not be liable for, and purchaser hereby releases SIC from any direct, indirect, consequential, special, 
incidental or punitive  damages in respect to the product.  In no event shall SIC be liable for any breach of  
warranty or other claim in an amount exceeding the purchase price of the  product.

The customer is responsible for the shipping costs to Seiler Instrument Company.  Seiler Instrument Company will 
pay the most economical method of shipping back to the customer.  Any special shipping method will be paid 
by the customer. 

MEDICAL DIVISION

Toll-Free: 800.489.2282 | Local: 314.968.2282 | Fax: 314.968.3601 | E-mail: [email protected] | www.seilerinst.com

Warranty must be registered online at:  

http://www.seilermicro.com/products/warranty-registration/ 

Dear Purchaser,

Congratulations on the purchase of your microscope.  Your instrument has been carefully assembled 
and shipped to you.  Please complete the Warranty Registration online at the link below and answer the 
questions to activate and guarantee your warranty. Retain this warranty document for your records.

Thank you for purchasing a Seiler microscope.

INTERNATIONAL

REV. APRIL 2016

Summary of Contents for COLPOSCOPE 935

































Reviews: