-20-
6.0 CLEANING INSTRUCTIONS
Seiler’s LED Heliolux is not designed to resist spillage from any direction. Keep the device dry and free from
spillage at all times.
To clean:
• Do not use any of the following for cleaning:
•
Full strength bleach.
•
Steam sterilization.
•
Dishwasher.
•
Acetone, lacquer thinner or other solvents.
• Do not use spray cleaners as the spray could enter through vents and damage the device.
• Ensure device is turned off.
• Use a cloth dampened with any of the following solutions.
•
Water with liquid detergent.
•
Isopropyl alcohol.
•
Household bleach and water mixed 9 parts water to 1 part bleach.
•
Commercial disinfectant.
• Dry with a soft cloth.
• Allow to fully dry before next use.
7.0 DISPOSAL INSTRUCTIONS
Disposal of the device once it has been determined to be at its end of life should be done in accordance with the fol-
lowing:
• Ensure it is not connected to MAINS power.
• Clean thoroughly with anti-bacterial solution to mitigate any residual bacterial contamination.
• Disassemble (consult factory for instructions):
• Recycle (as appropriate for local regulations:
•
Metals
•
Electronics
• The device is in compliance with Rohs.
8.0 SPECIFICATIONS
8.1 SYSTEM DESCRIPTION
Seiler’s LED Heliolux
generates illumination from a proprietary light engine which relies up a light emitting diode
and coupling reflectors designed to transfer the light from the LED into light cables at ideal beam angles and beam
diameters.
Seiler’s LED Heliolux
uses a proprietary driver to power the LED. Other than power the LED this driver performs
the following functions:
• Monitors the health of the device (temperature, current, voltage, wires, etc.)
• Sends relevant data to a digital display.