■
FEATURES
The Time Keeper ViB+ is a digital timer with a built-in vibration alarm function. The
time setting of the timer can be selected/set with a rotary switch. It also features a
range of useful functions for sports or other time counters such as a multi-timer that
allows setting the desired number of operations of several times-more than ordinary
stopwatches.
●
Single-timer function
Set the timer’s time setting by turning and
aligning the rotary switch with the desired dial
scale division.(11 settings can be mede: 1, 2, 3, 5,
10, 15, 20, 30, 40, 45, and 60 minutes.)
Overtime count and timer count-down/count-up
display functions can also be easily selected.
●
Multi-timer function
With the Single Timer only one of the 11
predetermined time settings with the rotary
switch can be selected. The Multi-Timer allows
selecting any time setting needed and different
time settings can also be combined. Selecting the
repeat number of timer cycles is also possible. (A
maximum of 10 settings is avail-able. The time
setting can be selected from 10 sec. to 99 min.
and 59 sec. and the repeat cycle number from 1 to
99 times.) Easily selecting overtime count and
timer countdown/add-on display functions is also
an option.
Turn the rotary
sw
itch, and push
the button to start.
26
●
Stopwatch function
Selectable in increments of 1/100 seconds up to
99 min. 59 sec. 99. Also counting the split time
can be done.
●
Time-Up message function
A beep sound or vibration warning indicates that
the time set on the timer is up. The Time-Up
warning settings available are: Beep Sound -
Vibration - No warning.
*
When setting the BEEP SOUND only, the sound
is released for confirmation when pressing the
button. Note that when selecting VIBRATION, no
sound is released for confirmation.
●
BATTERY RUNNING OUT Warning Function
The mark flashes.
Get set!
Start!
27
■
HOW TO USE THE TIMER/THE STOPWATCH
Timer reset
Time/Stopwatch
• Start and Stop
Stopwatch
• Split ON
• Split OFF
• 0 sec. reset
S
PL
IT
･
RE
SE
T
MIN
.
SEC.
STA
RT
･
ST
O
P
Dial position used as
timer time setting.
Used for setting the
multi-timer time.
*
Place into OFF
position when not used.
Display panel
Dial position for use
as a stopwatch.
Rotary switch
Button
Button
Button
Count-down( )
Select
Count-up( )
Names of Parts
Sets multi-timer repeat
number and can be
also used for changing
the Time-up warning.
Dial position for use as
a timer randomly set
to any value.
28
Display Details
BATTERY RUNNING OUT Warning Display (flashes)
When selecting
BEEP SOUND
When selecting NO VIBRATION/
NO BEEP SOUND
When selecting VIBRATION
: Count-up
: Count-down
Repeat number
*
Any repeat number from
1 through 99 can be
randomly selected.
Number of multi-timers set.
*
Up to 10 multi-timers
can be set to any time.
OT : Flashes when measuring
overtime
*
Overtime is counted also after
time-up.
(Up to 100 minutes max.)
SET : Flashes while
timer time is set.
29
