●
How to Reset the Repeat Number Set on the Timer to Any Desired Number
¿
¤
Align the knob of the rotary switch with .
‹
Press button
¿
and button
¡
simultaneously a single time. The repeat number set on the timer to any
desired number will be reset and 1 Time will be displayed.
*
Note that when button
¿
and button
¡
are kept depressed simultaneously for 2 seconds or longer
the ALL LIGHTS ON Display will appear.
*
The repeat number will be reset also when the ALL LIGHTS ON Display has appeared.
ALL LIGHTS ON Display
*
When the ALL LIGHTS ON Display appear in the status, this does not indicate an error. This
display appears when
¿
and
¡
are kept depressed simultaneously for more than 2 seconds.
*
In this case, press
¿
,
¡
or C buttons to restore the normal display.
*
Even when these buttons are not pressed, the normal display will be restored after a lapse of 60 seconds
or more.
ALL LIGHTS ON Display
(Press button
¿
and button
¡
once simultaneously.)
¡
38
●
HOW TO SET THE TIMER KNOB TO ANY DESIRED TIME
¿
¿
Example : Suppose one needs to repeat three entire courses consisting of 2 min. 30 sec.
running exercise followed by a 30 sec. walking interval training session.
(First running start)
(First interval)
(Second Running in Progress)
(Training finished)
(Third running in progress)
(Reset)
Beep
¤
Align the rotary switch with .
‹
Press button
¬
and select COUNTUP DISPLAY (
△
) or COUNT-DOWN DISPLAY (
▼
).
*
Select the display by pressing button
¬
also after the timer has started.
The time displayed is the elapsed time and the remaining time on each timer.
›
Press button
¿
to start the timer.
*
Each time button
¿
is pressed the timer starts/stops.
*
The flash display indicates which timer is counting and which repeat number is in progress.
*
The TIME-UP warning function gives a previous warning and shows that the time is up for each timer for
which the TIME-UP function has been set by selecting BEEP SOUND or VIBRATION.
*
When the time set on the timer and the repeat number are over, the overtime count will start.
fi
Press button
¿
to stop the timer.
fl
Press button
¡
to reset the timer.
¡
39
■
HOW TO USE THE STOPWATCH
¿
¡
¿
(Start)
(Split)
(Reset)
(Stop)
(Split canceled)
• Time can be counted in steps of 1/100 sec. up to 99 min. 59 sec. 99. (100 divisions)
*
When 100 minutes have elapsed a consecutive new time count from 00 min. 000
sec can begin.
• The split function is available.
¤
Align the knob of the rotary switch with the position.
‹
Press button
¿
to start the stopwatch.
*
Each time you press the
¿
button, a start and stop cycle is repeated.
›
Press button
¿
to stop the stopwatch.
fi
Press button
¡
to reset to 0 sec. (Reset)
¡
¡
40
●
How to Use Normally
Button
¿
→
Button
¿
→
Button
¡
Start
→
Stop
→
Reset
●
For time count totaling
Button
¿
→
Button
¿
→
Button
¿
→
Button
¿
→
Button
¡
Start
→
Stop
→
Restart
→
Stop
→
Reset
Can be repeated as often as you wish.
●
For counting the elapsed time (split time) in-between.
Button
¿
→
Button
¡
→
Button
¡
→
Button
¿
→
Button
¡
Start
→
Split
→
Split Canceled
→
Stop
→
Reset
Can be repeated as often as you wish.
●
For counting the time of two persons
Button
¿
→
Button
¡
→
Button
¿
→
Button
¡
→
Button
¡
Start
→
First person finished
→
Second person finished
→
Time of second person
→
Reset
Time of first person
41
