■
HOW TO USE THE TIMER BY SETTING ANY TIME (MULTI-TIMER)
• The timer can be set to any value. (Time can be set from 10 sec. to 99 min. 59 sec.)
• The multi-timer can be set for any desired time periods, as shown below.
Can be set up to 10 timers.
• COUNT-DOWN DISPLAY
⇔
COUNT-UP DISPLAY can be selected.
• This function indicates that the time is up by releasing a beep sound or vibration
alarm.
• Users can continue to count the time even after the time set on the timer is over
(Overtime Display).
• The number of repeat cycles of the set timers can be specified.
(1 - 99 times, infinite number of repeats)
Example: Suppose you want to set 3 timers.
The time cycles will be repeated for the set repeat number in the order of the times set on the 3 timers.
Timer 1
Timer 8
Timer 9
Timer 10
Timer 1
Timer 2
Timer 3
Timer 1
Timer 2
Timer 3
*
Users can select 1 - 99 times or an infinite number of times as the repeat number
(repeat frequency) for the maximum of 10 times as one set.
Timer 2
34
●
How to Set Any Time on the Timer
¿
〈
Suppose the user wants to set the timer 1 to 2 min. 30 sec. and timer 2 to 30 sec.
〉
¬
¤
Align the knob of the rotary switch with .
‹
Press button
¿
once and set in steps of 1 sec. at a time. When keeping button
¿
depressed for 2 or 3 seconds
the seconds advance rapidly and stop when the button is released. Similarly setting the minutes by pressing
button
¡
can be achived. Each time the button is pressed the time is set in 1 min. increments. Keeping this
button depressed advances the minutes rapidly, and the minute setting will stop when the button is released.
*
Note that when the time set is under 10 sec. the setting will automatically become 10 sec.
*
Users can set the minutes from 1 min. up to 99 min.
*
When setting the timer to any desired time, the time can be set ranging from 10 sec. up to 99 min. 59 sec.
›
Each time the button is pressed
¬
the time advances step by step to allow setting the timer to the needed
time. Set the time by repeating procedures
‹
and
›
.
*
To set the timer to any desired you can also set up to 10 timers at a time.
¡
¿
35
●
How to Check, Add or Alter the Time on the Timer
¿
¤
Align the knob of the rotary switch with .
‹
Press button
¬
and align with the location that needs checked, add or alter the time that has been set on
the timer.
›
Press button
¿
or button
¡
to be able to add or alter the time that has been set.
*
The timers that have already been set cannot be canceled. Be sure to refer to How to Reset the Desired
Time that has been set on the Timer.
¤
Align the knob of the rotary switch with .
‹
Keep button
¿
and button
¡
depressed simultaneously for 2 or 3 seconds to be able to reset.
〈
Suppose the user wants to set the timer 1 to 2 min. 30 sec. and timer 2 to 30 sec.
〉
〈
How to Reset the Desired Time You Have Set on the Timer (Erases all settings)
〉
¡
36
●
How to Set the Repeat Number of the Timer Set to Any Desired Time
(Set to 3 times)
(Set to any number of times)
*
Note that when button
¿
is pressed in this condition, the setting of the TIME-UP warning function can
be altered.
¤
Align the knob of the rotary switch with .
‹
When button
¡
is pressed a single time the repeat number will be 1. Keep the button depressed to
advance the repeat time rapidly. The repeat number will stop when you release the button.
*
The user can set the repeat number from 1 - 99 times.
›
When setting the repeat number to the infinite number of times setting, press button
¡
and align
with .
*
One can set the repeat time to the infinite number of times setting after “99 times.”
¡
¡
37
