Seiko SSE055J1 Complete User Manual Download Page 35

Page: 35 / 58

ASTRON 8X53 GPS SOLAR

CONTENTS

TO PRESERVE THE QUALITY OF YOUR WATCH



The above figures are examples. Both of them may be

different from the figure on the case back of your watch.

The case back shows the performance and caliber /
case number of your watch

Daily care

Performance and caliber / case number

●

The watch requires good daily care

• Do not wash the watch when its crown is at the extended position.
• Wipe away moisture, sweat or dirt with a soft cloth
• After soaking the watch in seawater, be sure to wash the watch in clean

pure water and wipe it dry carefully.



If your watch is rated as “non-water resistant” or “water resistant for daily use,” do not

wash the watch.

Performance and caliber / case number



P. 34

Water resistance



P. 35

●

Turn the crown from time to time

• In order to prevent corrosion of the crown, turn the crown from time to

time.

●

Press the buttons once in a while.

• Press the buttons once in a while to prevent corrosion of the buttons.



Be aware that you may activate the stopwatch or other function by pressing the buttons.

Caliber/case number

The number to identify

the type of your watch

Water resistance

Refer to

P. 35

Magnetic resistance

Refer to page

P. 36

Summary of Contents for SSE055J1



























































Search results

Summary of Contents for SSE055J1

Reviews:

Related manuals for SSE055J1

Brands by name

Popular brands

Seiko SSE055J1, Complete User Manual

Search results

Summary of Contents for SSE055J1

Reviews:

Related manuals for SSE055J1

Brands by name

Popular brands