Seiko SSE055J1 Complete User Manual Download

Page: 48 / 58

ASTRON 8X53 GPS SOLAR

TROUBLESHOOTING

CONTENTS

Press Button A and then release it.

Rotate the crown to set the date to “1.”

Press Button A and then release it.

Adjust the date so that the position of “1” will
locate at the center of the window.



If “1” is displayed, go to operation of

⑧

The watch enters the mode to adjust
the preliminary position of the
indicator hand.



During movement of the date, the buttons

cannot be operated.

The watch enters the mode to adjust the
preliminary position of the date.

The second hand stops at the
53-second position.

Turn the crown quickly to
move it continuously. Turn
the crown again to stop.

Turn the crown clockwise to
advance 1 step.

Turn the crown
counterclockwise to set back
1 step.

Continued on the

following page

Press and

then

release

Press and

then

release

Summary of Contents for SSE055J1



























































Search results

Summary of Contents for SSE055J1

Reviews:

Related manuals for SSE055J1

Brands by name

Popular brands

Seiko SSE055J1, Complete User Manual

Search results

Summary of Contents for SSE055J1

Reviews:

Related manuals for SSE055J1

Brands by name

Popular brands