Seiko SSE055J1 Complete User Manual Download

Page: 38 / 58

ASTRON 8X53 GPS SOLAR

TO PRESERVE THE QUALITY OF YOUR WATCH

CONTENTS

Band

Notes on the
length of the
band

Notes on skin
irritation and
allergy

Skin irritation caused by a band has various reasons such
as allergy to metals or leathers, or skin reactions against
friction on dust or the band itself.

Adjust the band to allow a little clearance with
your wrist to ensure proper airflow. When
wearing the watch, leave enough room to insert a
finger between the band and your wrist.

●

Metallic band

• Moisture, sweat or soil will cause rust even on a stainless steel band if they

are left for a long time.

• Lack of care may cause a yellowish or gold stain on the lower sleeve edge of

shirts.

• Wipe off moisture, sweat or soil with a soft cloth as soon as possible.
• To clean the soil around the joint gaps of the band, wipe it out in water and

then brush it off with a soft toothbrush (Protect the watch body from water

splashes by wrapping it up in plastic wrap etc.)

• Because some titanium bracelets use pins made of stainless steel, which has

outstanding strength, rust may form in the stainless steel parts.

• If rust advances, pins may poke out or drop out, and the watch case may fall

off the bracelet, or the clasp may not open.

• If a pin is poking out, personal injury may result. In such a case, refrain from

using the watch and request repair.

●

Leather band

• A leather band is susceptible to discoloration and deterioration from

moisture, sweat and direct sunlight.

• Wipe off moisture and sweat as soon as possible by gently blotting them up

with a dry cloth.

• Do not expose the watch to direct sunlight for a long time.
• Please take care when wearing a watch with light-colored band, as dirt is

likely to show up.

• Refrain from wearing a leather band watch other than Aqua Free bands while

bathing, swimming, and when working with water even if the watch itself is

water-resistant enforced for daily use (10-BAR/20-BAR water resistant).

●

Polyurethane band

• A polyurethane band is susceptible to discoloration from light, and may be

deteriorated by solvent or atmospheric humidity.

• A translucent, white, or pale colored band easily adsorbs other colors,

resulting in color smears or discoloration.

• Wash out dirt in water and clean it off with a dry cloth. (Protect the watch

body from water splashes by wrapping it up in plastic wrap etc.)

• When the band becomes less flexible, have the band replaced with a new

one. If you continue to use the band as it is, the band may develop cracks or

become brittle over time.

●

Silicone band

• As for material characteristics, the band is easily dirtied, and may be stained

and discolored. Wipe off dirt with a wet cloth or cleaning tissue.

• Unlike bands of other materials, cracks may result in the band being cut.

Take care not to damage the band with an edged tool.

The band touches the skin directly and becomes dirty with sweat or dust.

Therefore, lack of care may accelerate deterioration of the band or cause skin

irritation or stain on the sleeve edge. The watch requires a lot of attention for

long usage.

Summary of Contents for SSE055J1



























































Search results

Summary of Contents for SSE055J1

Reviews:

Related manuals for SSE055J1

Brands by name

Popular brands

Seiko SSE055J1, Complete User Manual

Search results

Summary of Contents for SSE055J1

Reviews:

Related manuals for SSE055J1

Brands by name

Popular brands