3
Chapter 1: Computer Requirement
1) Basic requirement:
z
CPU: 2.0 GHz or higher
z
Memory: 1Gb or higher
z
Hard disk: 80 Gb (recommend 20Gb free space)
z
Mother board: USB connection equipped
z
Network
card
z
Operating system: Microsoft Windows (2000, XP)
2) Recommendatory requirement:
z
CPU: 3.0 GHz or higher
z
Memory: 2 Gb or higher
z
Hard disk: 200 Gb or higher (NTFS format)
z
Mother board: USB connection equipped
z
Network
card
z
Operating system: Microsoft Windows (2000, XP)
NOTICE:
Suggest user format your hard disk into 2 partitions (NTFS). The first partition is used for installing
OS and other software, the second partition is used to save pictures and work files.
Chapter 2: Installation
1)
Move the packing box to the working site and avoid strong shaking.
2) Disassemble the wooden packing box from top to bottom. Check whether the parts are complete or
not according to the packing list.
3)
Lift the printer out by a forklift, and move it to the installation site.
4)
Check if the printer is level.
5)
Get rid of all the parts that stabilize the carriage holder, and install all the spare parts.
6) Move the carriage to the right of printer, then move back to the left manually. During this process,
checks if there are abnormal resistance and carefully inspect the belt & the encoder sensor are situated
in proper position.
7) Ground the printer. The grounded voltage shouldn’t be more than 0.3V, and the grounded resistance
should be less than 3
Ω
.
8) Connect the USB cable between printer and computer. Check if the wires and data cables are
plugged in properly.
9)
Install the output and the rip software.
