11
1.3 X Motor Speed Setting: Select"Test" --> "X Motor Speed Setting"
Noted
：
Speed calculation method:
（
Print head frequence/Print mode
）
*25.4 = carriage speed
240 mode：
normal
=(6460Hz/240dpi)*25.4mm=
684mm/s
,
high
=(8000Hz/240dpi)*25.4mm=
847mm/s
;
360 mode：
normal
=(6460Hz/360dpi)*25.4mm=
456mm/s
high
=(8000Hz/360dpi)*25.4mm=
564mm/s
;
Note
：
After entering the actual speed, have to click "Save" and then click "Test" so that the data
could be saved.
（After step 1.5, clean the tube, and then install the ink and printhead）
2)打印校准
2) Alignment
2.1
Printhead installation
There are 180,240,360
、
720
dpi modes .
"Normal speed" and "High
speed" are available.
“
Actual Speed
”
left
Carriage Speed/Printhead
Frequence
Click"Test", system
will send 1
second pulse.
（
1
）
Tilt the printhead in angle and then push the printhead all
the way in. Prevent printhead from scratching.
Printhead must install
under the o-ring！
