15
Note
:
Tighten the four screws at the printhead holder when finish adjustment and before
print the Hvert test diagram. Keep adjust until the first pass and second pass
face each other.
When the vertical adjustment is done, normally the horizontal alignment is well, if a
printhead's horizontal alignment is not aligned, then have to do the adjustment. The following diagram shows how to
adjust the horizontal position. let K be the reference, C as example:
2.4 Uniclr Adjustment:
The shortcut of “Unicolor” on the main interface is showed as the below picture:
Print the below adjusting picture by clicking the button of “Unicolor”(example for black).
Adjustment NG
！
K
C
Move the C printhead
toward. Adjustment OK
K
C
For the two groups of printhead with the same
color, just add the value of the two lines with
complete overlapped on the basis of original
value!
Separate Two
Lines -- NG
！
Two Lines are not
overlapped -- NG
！
Two Lines are
overlapped-- OK
！
