Seiko QP-400GS, Operating Manual

Page: 63 / 76

-
21
-
11.4.2 Manual time setting
① Keep pressed.
Press or to set the “Hour”,
and press .
* Check that “AM” or “PM” is set correctly.
② Press or to set the “Minutes”
to one minute ahead of the current minutes.
③ Press when the current seconds
reach “0.”
The “Minutes” and “Seconds” are shown
for five seconds, and then, the display
changes to the “Hour” and “Minutes.”
④ If the hand position of the secondary clock has been set, the hand adjustment is started.
* If the voltage of the capacitor has reduced to 3.5 V or less, “LCAP” and the current
time is displayed alternately on the time display, and the hand adjustment will not
be started. Once the capacitor is recharged, the time display shows the current time
only, and the hands are adjusted automatically.
For details, refer to “11.7 Special Display.”