Seiko QP-400GS, Operating Manual

Page: 53 / 76

-
11
-
For the Engineering Outfit
8
INSTALLATION OF CLOCK CONTROLLER
8.1 Wall-Mounting Type
By cutting off the protruded portions on the rear of the clock controller, the installation holes
can reach the wall. Open the front cover, and tighten the screws from inside the clock
controller to install it onto the wall.
8.2 Pole Type
Mount the metal fitting included with the clock unit to the rear of the clock controller, and
house the clock controller inside the pole by hooking the metal fitting to the inside of the pole.
時計駆動器
引掛金具
(時計に付属されています)
WARNING
When the clock controller is installed outdoors, be sure to house it in QF-BOX
(sold separately). Otherwise, water may enter inside it, resulting in an electric
shock hazard, malfunction or fire.
Protruded
portion
Cut off the protrusion
along this surface.
Clock controller
Metal fitting