Seiko QP-400GS, Operating Manual

Page: 52 / 76

-
10
-
For the Engineering Outfit
7.1.2 Installation
Install the solar panel 15 mm or more above
the clock unit.
7.2 Pole Type
7.2.1 Adjustment
Adjust the direction of the GNSS receiver
lest it should hit against the cover of
the clock unit when it is opened, and
tighten the mounting screws
“
A
”
securely.
Adjust the direction of the solar panel so
that it is exposed to the sunlight at least
four hours a day (from 10:00 AM to
2:00 PM), and tighten the mounting
screws
“
B
”
securely.
The solar panel can be turned within
the range of 90 degrees. By removing
the mounting screws
“
B
”
and aligning
the screw holes with other position
marks (△), however, the solar panel
surface can be turned to face all directions.
Solar panel surface
90°
15mm
or more
Mounting
screw “B”
Mounting
screw “B”
Clock
unit
ｿｰﾗｰﾊﾟ ﾈﾙ
回転用
（ 図４ ）
長波受信器
( Ｌ Ｆ Ｒ ユ ニ ッ ト )
時計体
取付ネ ジ Ｂ
取付ネ ジＡ
Ｌ Ｆ Ｒ 取付用
GNSS receiver