- 10 -
CAUTION
For North American – “Use only CSA/UL Certified power supply cord set, Polarized,
Type SPT-2 or heavier, minimum No. 18 AWG copper, rated 125 or 250 V, minimum
1 A, minimum 6 ft (1.8 m),maximum 10 ft (3 m) long.”
For Other Country – “Must comply with requirements set out by the Safety
Approval/Certification Organization in each country of use.”
Unplug the AC cable except when using the charger.
The charger is operating whether or not it is equipped with the battery pack.
Unplug the AC cable when cleaning the charger.
If not, it might cause an electric shock.
Keep the charger away from children.
If not, it might cause injury.
Keep the charger away from direct sun light and high temperature. If not, it might
cause fire or a failure.
DO NOT put the charger in a place where is humid and dusty.
If not, it might cause fire or a failure.
DO NOT touch the charger by wet hand.
If not, it might cause an electric shock.
While using the charger, DO NOT cover the top of the printer with cloth, etc.
If not, it might cause fire or a failure.
Keep the charger away from unstable, shaky, unsteady and slanting environment.
If not, it might cause injury or a failure.
