Seiko Astron 3X22 Complete User Manual Download

Page: 9 / 50

How to check when the time zone information was configured for your watch

The case back shows the caliber-case number of

your watch.

The number to

identify the watch

type

Caliber/case

number

* Display may vary depending on the model.

By referring to caliber-case number shown on the case back, you will be able to determine when

the time zone data was configured.

For more details, refer to the URL below.

https://www.seikowatches.com/global-en/customerservice/knowledge/

gpstimezonedatainfo

In a region where the time zone has changed after time zone information was set on your watch,

the correct time will not be displayed even if time zone adjustment is performed through GPS radio

reception. Please perform the following operations to display the proper time.

<To set the time on the product in a region in which the time zone has

changed>

1. Select the current time in the region, using the manual time difference setting (selection).

If DST (daylight saving time or “summer time”) is in effect, select a time that takes that into

account.
Please see "About manual time difference setting (selection)"

P. 23

for details.

2. Next, adjust the time by manual time adjustment.

For details, please refer to "Manual time adjustment"

P. 21

3. When using the watch within the same time zone, the correct time will be displayed after

automatic (GPS) or manual time adjustments.

4. When moving from a region where the official time zone has changed to a different time zone,

then back to the region where the official time zone has changed, carry out the same operations

from 1. - 3. as indicated above to display the correct time in the region where the official time

zone has changed.

READ FIRST

ASTRON 3X22 GPS SOLAR

Summary of Contents for Astron 3X22



















































Search results

Summary of Contents for Astron 3X22

Reviews:

Related manuals for Astron 3X22

Brands by name

Popular brands

Seiko Astron 3X22, Complete User Manual

Search results

Summary of Contents for Astron 3X22

Reviews:

Related manuals for Astron 3X22

Brands by name

Popular brands