Seiko Astron 3X22 Complete User Manual Download

Page: 28 / 50

Check whether leap second data reception was successful

The reception result (success or failure) of the regular leap second data reception is displayed for 5 seconds.

Press Button A once and then

release it

The seconds hand will indicate the reception result.

Press

and then

release

* When Button A is kept pressed, the watch enters the

Manual time adjustment operation.

The result of the reception is

displayed

The seconds hand displays the result of the GPS signal

reception (time adjustment or time zone adjustment).

Seconds hand: Reception result (success/failure)

Result

Successful

Failed

Display

Position Y 8-second position

N 52-second

position

* After 5 seconds have elapsed or when Button B is

pressed, the watch returns to the time display mode.

The seconds hand displays the result of the leap

second data reception (successful / failed).

The minute hand moves to the 32-minute position (LS),

indicating that there is a “leap second information

reception result”.

Seconds hand

Press

and then

release

Seconds hand: Reception result (success/failure)

Result

Successful

Failed

Display

Position Y 8-second position

N 52-second

position

* After 5 seconds have elapsed or when Button B is

pressed, the watch returns to the time display mode.

When the leap second data

reception result is Y (successful)

•

The leap second data reception was successful.

Use the watch as it is.

When the leap second data

reception result is N (failed)

•

The leap second data reception, periodically

performed, has not been successful.

It will be performed automatically with the next GPS

signal reception (automatic time adjustment,

manual time adjustment or time zone adjustment).

Use the watch as it is.

* The leap second data is received on or after

December 1st and June 1st.

* Even when the leap second data reception has not

been successful, the time is correct until the leap

second data is added (deleted).

Move to the outdoors where GPS signals can be easily

received as necessary to receive GPS signals.
→ Place where GPS signals can be easily received/

Place where GPS signals cannot be received

P. 16

Press Button A and then release it while the result of the reception is displayed (for

5 seconds) in step 2

BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)

ASTRON 3X22 GPS SOLAR

Summary of Contents for Astron 3X22



















































Search results

Summary of Contents for Astron 3X22

Reviews:

Related manuals for Astron 3X22

Brands by name

Popular brands

Seiko Astron 3X22, Complete User Manual

Search results

Summary of Contents for Astron 3X22

Reviews:

Related manuals for Astron 3X22

Brands by name

Popular brands