Seiko Epson P130A, Manual

Page: 153 / 301

82
HTML.bk Rev. D
A5 size STATW.FM
2/1/99 Pass 2
L
Miyazaki _______
Yamanouchi _______
Jacqueline _______
Using EPSON Status Monitor 2
If you installed the Status Monitor 2 utility, you can get detailed
information on the current status of the printer.
Note:
❏
If you have not installed the Status Monitor and want to do so, see
“Installing the Status Monitor 2”.
❏
Before using the Status Monitor, be sure to read the README file
located in the EPSON Status Monitor 2 folder in the Epson folder
on your hard drive.
Installing the Status Monitor 2
To use Status Monitor 2, you need to install the software as
described below:
Note:
If you installed Status Monitor 2 when you installed the printer
software, you do not need to reinstall it.
1. Make sure Windows is running. Insert the printer software
CD-ROM in the CD-ROM drive. (For printer software floppy
disk users, insert the floppy disk into a disk drive.)
2. If a dialog box appears, click Quit .
3. Click Start , and select Run .
4. Type D:\STM2\SETUP. If the CD-ROM drive has a drive letter
other than “D“ or if you are using the floppy disk version,
substitute the appropriate letter (for example,
A:\SETUP ).
5. Click OK , then follow the instructions on the screen.