Seiko Epson P130A, Manual

Page: 209 / 301

138
HTML.bk Rev. D
A5 size TRBLE.FM
2/1/99 Pass 2
L
Miyazaki _______
Yamanouchi _______
Jacqueline _______
PAPER NOT
STRAIGHT
Paper Out
Slippage occurred
and paper was fed
at an angle. Reload paper. See
“Paper Feed or Paper
Jam Problems Occur
Frequently”.
RELOAD PAPER
Paper Out
Paper could not be
reversed into the
printing position. Remove then reload
the paper so that the
right and bottom edges
are straight and in line
with the rows of punch
holes on the printer. See
"Paper Handling".
Paper is set out of the
printable area.
Paper is set out of the
horizontal cutting
area.
Paper is not fully
ejected. Cut the paper at the
paper insertion slot,
then reload paper.
PAPER NOT CUT error
was cleared. Reload paper.
PUSH LEVER
DOWN
Paper Out
Paper set lever was
released during the
printing process or
another operation. Push the paper set lever
down. Start printing
again from the
beginning for best
results.
REMOVE PAPER
Paper Out
Paper set is too thick
for head cleaning. Push the paper set lever
down to remove the
paper. Head cleaning
automatically starts.
After cleaning, when
”PAPER OUT” is
displayed, reload
paper.
UNABLE TO PRINT While an error
occurs, or the ink
compartment cover
is open, you try to
print a test pattern
(nozzle check, status
check, head
alignment, or paper
thickness pattern)
from the SelecType
settings. After 3 seconds the
message disappears.
Press the Pause button
to exit the SelecType
mode. When an error or
status message
appears again, clear
and perform printing a
test pattern again.