Seiko Epson P130A, Manual

Page: 179 / 301

108
HTML.bk Rev. D
A5 size PAPER.FM
2/1/99 Pass 2
L
Miyazaki _______
Yamanouchi _______
Jacqueline _______
Cutting roll paper or printing page lines
When your print job is finished, the printer cuts the roll paper
automatically or prints page lines around the document
according to your settings. You can make these settings using the
control panel or printer software.
Note:
Software usually overrides control panel settings. Use your software to
make settings whenever possible.
Using the Auto Cut setting
When you want the roll paper to be cut automatically after your
print job, use the Auto Cut setting. To make the Auto Cut setting
using the
Paper Source button on the control panel, see
“Buttons”. To use the printer software, see “Using the Roll Paper
Settings”.
Note:
When the printer cuts the paper, first the left part of the paper is cut,
then the right, and finally the center. Never turn off the printer before
the paper is cut completely.
Cutting the roll paper manually
To cut the roll paper when the Auto Cut setting is off, follow the
steps below.
Cutting after the document is printed
1. Make sure the document is printed, then press the Paper
Source button repeatedly until the Roll Auto Cut light is on.
2. Press the Cut/Eject button. The roll paper is cut.
Cutting the roll paper at other times
1. Press the Paper Feed button to position the paper in place
for cutting.