For more information about firmware, please visit WWW.SEIKAKU.COM. Please check the
hardware version twice to identify the compatibility of firmware tended to upgrade.
FIRMWARE UPDATE
a. There is no sound for the system
1). Please check if the device powered on, its screen lit or not.
2). Please make sure “Talk” button was pressed before voicing.
3). Please recheck the setting of MIC volume, make sure it was in a proper position.
4). Please check the channels assignment, make sure the one you output in hooked up with
the input at present.
5). Please the amplifier or active speaker on the circuit, make sure they are charged and set
appropriately.
6). Please make sure the entire system configuration is set rightly.
7). Please try to restart all the devices.
8). Please make sure all the physical connections are stable and right.
9). If all steps above checked, defects still exited, please insult the professional for help.
b. Sound seems to be abnormal
1). Please check the sound sources, low quality input always cause distortion and
resonance.
2). Please check the volume setting, consumption overloaded would cause distortion and
resonance either.
3). Please try to restart all the devices.
4). Please make sure all the digital linkages are adopted high quality shield cat5e network
cable or above, and professional cables for analog too.
5). If there some intermittent clipping sound, please check all the joint point are fixed well.
6). Please make sure devices and cables are not under high magnetic or high radical
environment.
7). Please make sure the furthest length form the sever host is no more than 100m. (150m
for the grounded linkage)
8). Please make sure the analog transmission also within the fidelity limitation.
9). If all steps above checked, defects still exited, please insult the professional for help.
FAQ
13
AUDIO MATRIX
Summary of Contents for AUDIO MATRIX RPM200
Page 1: ...RPM200 Paging Station USER S MANUAL AUDIO MATRIX...
Page 3: ...1 AUDIO MATRIX...
Page 4: ...2 AUDIO MATRIX...