c. Devices can not be found
1). Please make sure devices are linked well.
2). Please make sure all devices were assigned their unique ID with MatrixSystemEditor at the
initial configuration.
3). If this system using several sever hosts for extend linkage, please make sure the system
were set rightly by DANTE Controller. Please refer to “Configuration for multiple sever host
linked” part for details.
4). Please try to restart all the devices.
5). If all steps above checked, defects still exited, please insult the professional for help.
d. Software can not start
1). Please make sure the operating system version is later than Windows 7.
2). Please make sure NetFreameWork4.5.* suit is installed.
3). Please make sure no firewall or antivirus software affects their running.
4). Please make sure system acquired valid IP and shown no error.
5). If all steps above checked, defects still exited, please insult the professional for help.
MIC Input
• Active balanced
• Connector: 3-pin female XLR, ,(1 Gnd,2 Signal, 3 LED Power)
• Phantom Power: +12VDC @ 6mA
Indicators and switch
• LCD Display: Zone activation
• LEDs: Signal Status
• Switch: Push to Talk
Ports
• RD net to Matrix: RJ45, 100 m CAT 5e cable
• USB: For Chimes Sound file (4 seconds)
Dimensions
• L x H x D: 166 x 53 x 162 mm
FAQ
SPECIFICATIONS
14
AUDIO MATRIX
NF04945-1.0
Summary of Contents for AUDIO MATRIX RPM200
Page 1: ...RPM200 Paging Station USER S MANUAL AUDIO MATRIX...
Page 3: ...1 AUDIO MATRIX...
Page 4: ...2 AUDIO MATRIX...
