Azden 1000BT, User Manual

Page: 1 / 8

User’s Guide
1000URX • 1000URX\AB • 1000URX\VM • 1000URX\Si
1000BT • 1000XT
ENHANCED BROADCAST PERFORMANCE
UHF WIRELESS SYSTEM
Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010
vox - 516.328.7500 • fax - 516.328.7506 • email - azdenus@azdencorp.com
© 2003-2005 Azden Corporation
P1020-05
Printed in USA
SPECIFICATIONS
1000URX - 1000URX\AB - 1000URX\Si - 1000URX\VM
RF Carrier Frequency Range 121 steps ~ 723.000 - 735.000MHz
MicroComputer Controlled PLL Synth.
Effective Operating Range 200 - 300 ft ~ 60 - 100m
Frequency Response 50 - 15kHz ( ± 1.5dB)
RF Sensitivity (12dB SINAD) 1.2 μμμμμ V
Adjacent Channel Selectivity > 73dB ( ± 250kHz)
Image Rejection > 93dB
IF Rejection > 93dB
Audio THD < 0.8%
Audio Output +4dBm ± 40kHz Deviation (-40dBm ± 5kHz Deviation for 1000URX\Si)
Output Impedance Line - 600 Ω Ω
Ω Ω Ω
~ MIC - 600 Ω ( Ω (
Ω ( Ω ( Ω (
300 Ω Ω
Ω Ω Ω
for 1000URX\Si)
Signal/Noise Ratio > 62dB ( ± 5kHz Deviation)
Power Requirements 11 - 15V DC @ 220mA (10 - 17V DC @ 200mA for 1000URX\Si)
Dimensions (1000URX) 3.3 (W) x 3.9 (H) x 1.2 (D) inches
84 (W) x 100 (H) x 30 (D) mm
Operating Temperature Range 32
0
- 113
0
F ~ 0
0
- 45
0
C
Weight 9.88 ounces ~ 280g for 1000URX
15.87ounces ~ 450g for 1000URX\AB
8.81ounces ~ 250g for 1000URX\AB
1000BT
Output Power 20mW
Max Modulation Sensitivity -4dBm
MIC Level / Imped. -60dBm / 2.2k Ω Ω Ω Ω Ω (
±
5kHz Deviation)
Power Requirements 9V DC (Alkaline) @ < 62mA
Dimensions 2.5 (W) x 3.85 (H) x 1.0 (D) inches
63 (W) x 98 (H) x 27 (D) mm
Weight w/Battery 5.64 ounces ~ 160g
1000XT
Output Power 20mW
Max Modulation Sensitivity (ECM -- Dynamic) +20dBM ~ 0dBm
MIC Level / Imped. (ECM) -35dBm / 2.2k Ω Ω Ω Ω Ω ( ± 5kHz Dev.)
MIC Level / Imped. (Dynamic) -55dBm / 2.2k Ω Ω
Ω Ω Ω
( ± 5kHz Dev.)
Power Requirements 9V DC (Alkaline) @ < 60mA
Dimensions 1.57 (W) x 4.4 (H) x 1.57 (D) inches
40 (W) x 112 (H) x 40 (D) mm
Weight w/Battery 6.7 ounces ~ 190g
Due to constant improvements, specifications are subject to change without notice.
Licensing
Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license
depends largely on the user’s classification, application and frequency. Contact the appropriate agency (FCC in
the USA) for further information.