⑤
②
③
④
①
Battery cover
About Ni-MH Battery
1. Ni-MH battery (AZDEN item# APS-20501) life is one year under normal use condition or five hundred times
charging. Replace to new battery when operation time has decreased significantly even fully charged.
2. Use the specified battery charger (AMC-3) when charging.
How to change the batteries
●
Batteries are placed in the battery compartment after sliding the battery compartment door down and away.
To remove the battery, pull down + side first.
How to recharge
①
Insert the AC adapter into socket and connect with the mic charger.
②
Insert the mic into the mic charger.
③
The red power LED is growing when charging.
④
After 10 hours later, the charging is completed as the indicator turns green.
⑤
Make sure the wireless mic is in the OFF position.
●
Only special Ni-MH Battery can be rechargeable. Do not attempt to charge any other type of dry cell or rechargeable
battery. You are recommended to use AZDEN original battery "APS-20501".
Specification
Power DC2.4V (the provided 2-Ni-MH battery)
Dimensions 58 x 240 mm
Weight approx. 300g (Include 2-Ni-MH battery)
Microphone Element Type Dynamic Mic
Mic level 94dB SPL
Frequency response 50
〜
10kHz
Standard Packing item Ni-MH battery x2
1-12-17 Kamirenjaku Mitaka-shi Tokyo 181-8533 Japan
Tel :+81(0)422-55-5115 Fax :+81(0)422-55-0131
E-mail : [email protected] URL http://www.azden.co.jp
Printed in Japan 060-35670-01
IRH-20
INFRARED HANDHELD MICROPHONE
User's Guide
Feature
◆
Don't get interference by other generally used wireless method like UHF and VHF.
◆
The IRH-20 utilize two emitters at bottom and top for transmitting audio in all 360
degree direction.
◆
Two channel setting can be switched either channel on the spot by just changing
the rotary switch.
