Section 3: Pump Operations
Models Slimline, PSHR 2410 and 1210 Pumps
2020 Heli-Pump Operations Manual
(Version F)
15
We Engineer Solutions
Models Slimline, PSHR 2410 and 1210 Pumps
Slimline, PSHR 2410 and PSHR 1210 pumping systems use pumps with the following specifications:
PSHR Slimline
•
24 VDC, 10 AMPS, 10 USGPM (37 LPM)
•
Duty cycle: 30 minutes ON and 30 minutes OFF.
•
Motor: 1900 RPM UL Listed, CSA certified.
•
Inlet 1"
•
Outlet 3/4"
PSHR 2410 Heli-Pump
•
24 VDC, 10 AMPS, 11 USGPM (40 LPM)
•
Duty cycle: 30 minutes ON and 30 minutes OFF.
•
Motor: 1900 RPM UL Listed, CSA certified.
•
Inlet 1"
•
Outlet 3/4"
PSHR 1210 Heli-Pump
•
12 VDC, 18 AMPS, 11 USGPM (40 LPM)
•
Duty cycle: 30 minutes ON and 30 minutes OFF.
•
Motor: 1900 RPM UL Listed, CSA certified.
•
Inlet 1"
•
Outlet 3/4"
Priming
These pumps are designed to self-prime with dry gears. Expect suction
lift as follows:
Manual Nozzle:
5.5 feet (1.7 m) with diesel
6.7 feet (2.1 m) with gasoline
If your installation requires a greater distance from the lowest fuel level to the pump, this pump may not
prime until the gears are coated with fluid. To coat the gears, remove the plug on the top of the pump and
pour a small quantity of motor oil into the gear cavity. Replace the plug, turn the pump on and open the
nozzle.