SEH primos, User Manual

Page: 74 / 78

primos User Manual Appendix
70
7. Select Actions – Load software software from the menu bar.
The dialog Load software appears.
8. Specify the primos software file.
9. Click
Load .
The software update is executed. This may take a few minutes.
10. Confirm the success notification by clicking OK .

primos assigns itself a new IP address automatically and is displayed in the SEH pri-
mos App under this address. primos assigns itself a new IP address automatically and
is displayed in the SEH primos App under this address. If necessary, refresh the SEH
primos App list.
A connection to the primos Control Center cannot be established
Eliminate possible error sources. First of all, check:
- the cabling connections,
- the primos IP address (

7) and
- the proxy settings of your browser.
If you still cannot establish any connection, the following safety mechanisms might be
the cause:

The access is protected via SSL/TLS (HTTPS)

45.

The TCP port access control is enabled

48.

The cipher suites of the encryption level are not supported by the browser

43.

primos is in the BIOS mode

69.
The password is no longer available
The access to the primos is controlled by means of user accounts. You will need a user
name and a password to get access. You can use the local administrator account or
directory service users (

46).
If you only use the local administrator account and have lost the password, you can reset
primos to its default values (factory settings)

62.During this process the password is
also reset to factory settings, but all other settings are lost as well.