SEH primos, User Manual

Page: 66 / 78

primos User Manual Maintenance
62
7.1 How to Secure the Configuration Settings (Backup)
You can save the configuration settings (including certificates) as backup copy on your
local client. This allows you to get back to a stable configuration status at any time.
Afterwards, the backup file can be loaded onto a primos. The configuration settings in the
file will then be taken over by the device.
What Do You
Want to Do?

’Saving a Backup’

62

’Loading a Backup onto a primos’

62
Saving a Backup
1. Start the primos Control Center.
2. Select
MAINTENANCE – Backup .
3. Click Save .

The backup file is saved to your client.
Loading a Backup onto a primos
Note
You can only load backups that were created for the same major version of primos
software. (Major software versions are distinguished by the second level of numbering.)
Example: A backup created for primos software 17.1.x cannot be installed on primos with
software 17.2.x.
1. Start the primos Control Center.
2. Select
MAINTENANCE – Backup .
3. Click Browse .
4. Specify the primos backup file.
5. Click
Install .

The configuration settings in the backup file will then be taken over by primos.
7.2 How to Reset primos to Its Default Settings (Reset)
You can reset primos to its default settings (factory settings). All previously configured
settings will be deleted in this process.
Benefits and
Purpose
You must reset the configuration settings, for example, if you have changed the location
of primos and thus want to use it in a different network. Before this change of location,
you should reset primos to the default settings to install primos in another network.