primos User Manual
Device Settings
21
always takes priority over a manually defined time server.
Requirements
A time server is integrated into the network.
1. Start the primos Control Center.
2. Select
NETWORK – Date/Time
.
3. Tick
Date/Time
.
4. Into the
Time server
box, enter the IP address or the host name of the time server
(The host name can only be used if a DNS server was configured beforehand.)
5. Select the code for your local time zone from the
Time zone
list.
6. Click
Save
to confirm.
The settings are saved.
4.3
How to Configure Local Users
When using user authentication, users are used to control who can print
35. To do
this, you can either use directory service users (
17) or local users.
You set up local users on primos. Each user needs a name and password. In addition, a
user can be assigned to one or several user groups (
22) to enter a large number of
users more easily when using user authentication.
What Do You
Want to Do?
Create Local User
1. Start the primos Control Center.
2. Select
DEVICE – Users
.
3. Into the
Name
box, enter a freely definable user name.
(a–z, A–Z, and 0–9 can be entered.)
4. Into the
Password
box, enter a password.
5. Repeat the password.
6. In the
Group
area, select the user groups.
7. To confirm, click
Save
.
The local user is created.
Change Password
1. Start the primos Control Center.
Summary of Contents for primos
Page 1: ...User Manual...
