Segway S301000-20100A, Service Manual

Page: 94 / 407

CRANKCASE\CRANKSHAFT\BALANCE SHAFT
3-4-21
◆ ◆ Align the position and load the lower crankcase. Align the position and load the lower crankcase.
◆
The rubber hammer can be gently tapped around
the crankcase to ensure that there is no gap on the
sealing surface of the upper and lower cases.
◆ ◆ Screw in four M8 bolts, eight M10 bolts, and one M6 Screw in four M8 bolts, eight M10 bolts, and one M6
bolt.
bolt.
!
CAUTION CAUTION
Replace the M10 bolt each time you install the crankcase.
◆ Tighten the bolts in place in sequence.
Bolt M10
one step:: 12 N·m (1.2 kgf·m, 8.6 ft·lb ft·lb)
two step:
：
28 N·m (2.8 kgf·m, 20.6 ft·lb ft·lb)
three step: turning 90°
Bolt M8
35 N·m (3.5 kgf·m, 26 ft·lb ft·lb)
Bolt M6
12 N·m (1.2 kgf·m, 106 in·lbs ·lbs)
◆
Turn the crankcase and screw 2pcs M8 bolts and
11pcs M6 bolts into the upper crankcase.
M8
M10
M6
11
22
33
44
55
66
77
88
99
10 10
11 11
12 12
13 13
M8
M6