Sega Virtua Tennis 4, Owner'S Manual

Page: 87 / 136

68
COIN HANDLING
12
If the machine is positioned in location where only tokens are used, then the NRI Coin Acceptor can be programmed
to accept and credit special coins/tokens.
Please follow the instructions below to enable and program the TEACH & RUN facility.
In order to generate new acceptance bands you can teach up to eight coin channels using the lower switching block
on the coin validator. You will need at least ten coins of the new type. There is a different switch assignment for
the double and single block data-management:
Switching block S2 (with double block data-management)
DIL switch off on
S2.1 Coin channel 9 teach
S2.2 Coin channel 10 teach
S2.3 Coin channel 11 teach
S2.4 Coin channel 12 teach
S2.5 Coin channel 13 teach
S2.6 Coin channel 14 teach
S2.7 Coin channel 15 teach
S2.8 Coin channel 16 teach
S2.9 Teach mode switch off switch on
S2.10 Acceptance band normal wide
By default, the eight teach channels have been programmed, so that one coin impulse is transmitted to the machine
via coin signal line 6, when a new coin is accepted.
TEACH AND RUN PROGRAMMING (NRI)
12-6 NRI OPTIONS - TEACH AND RUN PROGRAMMING
TEACHING COIN CHANNELS USING TEACH MODE