Sega Virtua Tennis 4 Page 8 Owner'S Manual Download

Page: 8 / 136

INTRODUCTION

Procedures not described in this manual or marked as 'to be carried out by site

maintenance personnel or other qualified professionals' should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualified persons may cause serious accidents, including electrocution.

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualified professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialized knowledge.

The site maintenance personnel or other qualified professionals mentioned in this manual are defined as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/

expendable parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualified professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualifications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualified professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Definition of 'Site Maintenance Personnel or Other Qualified Individuals'

GAME VERSION NOTATION

Version numbers appearing in TEST MODE are displayed as asterisks and hyphens. When describing software

version upgrades, only major version and minor version numbers are displayed. Release version numbers are for

SEGA's administrative use only. If you require these numbers, please contact the office listed in this manual or the

point of purchase for this product.

VER.*.**.--

(Ver)

Major version

(may be two digits)

Minor version

Release version

Summary of Contents for Virtua Tennis 4









































































































































Search results

Summary of Contents for Virtua Tennis 4

Reviews:

Related manuals for Virtua Tennis 4

Brands by name

Popular brands

Sega Virtua Tennis 4, Owner'S Manual

Search results

Summary of Contents for Virtua Tennis 4

Reviews:

Related manuals for Virtua Tennis 4

Brands by name

Popular brands