Sega Virtua Tennis 4 Page 45 Owner'S Manual Download

Page: 45 / 136

EXPLANA

TION OF TEST

AND DA

DISPLA

9-2 SYSTEM TEST MODE

COIN ASSIGNMENTS

Press the TEST Button, enter TEST MODE, and the SYSTEM TEST MENU screen will be displayed.

For Virtua Tennis 4, use the settings as listed below for “COIN ASSIGNMENTS” in SYSTEM TEST MODE.

(See also RINGEDGE service manual.)

About the COIN CHUTE TYPE settings for the following cabinet types

- Set to COMMON if the number of available coin slots is lower than the maximum number of players.

NOTE: However, note that this will mean credits are shared.

- If set to INDIVIDUAL, then START buttons number 2 and 4 will stop functioning and become unusable.

● 1 cabinet, maximum 4 players, 4 coin slots available

Set to INDIVIDUAL.

● 2 cabinets, maximum 4 players, 2 coin slots available

Set to COMMON.

NOTE: However, note that this will mean credits are shared.

If set to INDIVIDUAL, then START buttons number 2 and 4 will stop functioning.

● 2 cabinets, maximum 2 players, 2 coin slots available

Set to INDIVIDUAL.

● 1 cabinet, maximum 2 players, 2 coin slots available

Set to INDIVIDUAL.

● 1 cabinet, maximum 2 players, 1 coin slot available

Set to COMMON.

NOTE: However, note that this will mean credits are shared.

If set to INDIVIDUAL, then START button number 2 will stop functioning.

● The details of changes to TEST MODE settings are saved when you exit from TEST MODE by selecting

EXIT from the SYSTEM TEST MODE menu. Be careful because if the power is turned off before that point,

changes to the settings will be lost.

● Use with the specified settings. If settings other than those specified are used, inappropriate operations or

malfunction may occur.

-COIN TO CREDIT RATE

Set as 1 COIN - 1 PLAY when using a Credit Bd. Setting the game to anything other that 1 COIN - 1 PLAY will

force the game to produce uncontrolable credit settings. ALL COIN SETTINGS ARE SET VIA THE CREDIT

BOARD.

-GAME COST SETTING

The necessary credits for GAME START / CONTINUE can be set here.

Set as desired.

Summary of Contents for Virtua Tennis 4









































































































































Search results

Summary of Contents for Virtua Tennis 4

Reviews:

Related manuals for Virtua Tennis 4

Brands by name

Popular brands

Sega Virtua Tennis 4, Owner'S Manual

Search results

Summary of Contents for Virtua Tennis 4

Reviews:

Related manuals for Virtua Tennis 4

Brands by name

Popular brands