Sega Virtua Tennis 4 Page 33 Owner'S Manual Download

Page: 33 / 136

PRECAUTIONS WHEN MOVING THE MACHINE

• Always disconnect the power cable before moving the product. If it is moved

with the power cable connected, the cable could be damaged, causing fire or

electric shock.
• To move the unit over the floor, pull in the adjustors and have the casters

contact the floor. While moving the unit, be careful that the casters do not roll over

the power cord or the ground wire. If cord or wire is damaged, there could be

electrical shocks and/or short circuits.
• When crossing a sloped or stepped area, always have the machine travel

lengthways. Travelling with the machine in a sideways position could result in the

machine falling over onto its side. Always use a minimum of two people working

together plus lifting apparatus to accommodate slopped areas or stairs.
• To lift up the cabinet, hold it at the bottom at the designated lifting points. If you

hold it anywhere else, the weight of the cabinet could cause damage to parts or

attachments, resulting in injury.
• Do not push the cabinet from the side when moving. Pushing from the side as it

may result in the cabinet falling over.

Summary of Contents for Virtua Tennis 4









































































































































Search results

Summary of Contents for Virtua Tennis 4

Reviews:

Related manuals for Virtua Tennis 4

Brands by name

Popular brands

Sega Virtua Tennis 4, Owner'S Manual

Search results

Summary of Contents for Virtua Tennis 4

Reviews:

Related manuals for Virtua Tennis 4

Brands by name

Popular brands