Sega Virtua Cop 3, Service Manual

Page: 54 / 116

51
5.1.1. The Main Characters
Virtua Cop 3 has two main characters, RAGE (1P) and SMARTY (2P). JANET appears as an allied
character during the game but cannot be controlled.
5.1.1.1. 1P Character: RAGE
Strong as an ox and just as uncontrollable, this
hothead tends to act before he thinks. That’s made
him something of a headache for the department.
5.1.1.2. 2P Character: SMARTY
Rage’s complete opposite, Smarty is a cautious,
brainy type who never loses his cool. He’s also the
best marksman in the precinct.
5.1.2. Playing Virtua Cop 3
5.1.2.1. Start a New Game
Press the START button to begin a new game. Mission Select follows.
5.1.2.2. Calibrating at the Start of the Game
The availability of calibration at the start of each game may be set in Test Mode. The following applies when
calibration on demand is enabled.
To enter the calibration screen, hold down the foot pedal, aim the gun controller at the screen, and press the
START button when starting the game. Aim the gun at the centre target and pull the trigger. When
calibration is complete, press the START button to exit to Mission Select.
5.1.2.3. Mission Select
Displays the three mission panels, Simple, Normal and Hard. Shoot the desired mission panel to start.
Players are free to start any mission they like.
When a mission has been completed, the game returns to Mission Select. The mission panel for the
completed mission reads “Complete” and cannot be selected. Select a different mission.