Sega Virtua Cop 3, Service Manual

Page: 78 / 116

75
● CURSOR:
Select CURSOR and aim the controller at the screen to display a round cursor
(blue for 1P, red for 2P) where the controller hits the screen. Use this cursor to
check calibration.
● OUT OF SCREEN:
Displays “OUT OF SCREEN” when the controller is pointed outside the screen.
Values cannot be set when the controller is out of screen.
Changes to settings are not enabled until the Test Mode is exited. After changing settings, be sure to exit
Test Mode.
After changing the settings, select EXIT and press the TEST Button to return to the Game Test Menu
screen.
6.4.5. BOOKKEEPING
Select BOOKKEEPING on the Game Test Menu screen to display the three screens of operating status
data.
Press the TEST Button on the BOOKKEEPING 1/3 and BOOKKEEPING 2/3 screens to move to the second
and third (BOOKKEEPING 3/3) screens. Press the TEST Button in the third screen to return to the Game
Test Menu screen.
The display items for the screen (Page 1 of 3) are as follows.
● COIN CHUTE #1: The number of coins inserted into Coin Slot 1.
● COIN CHUTE #2: The number of coins inserted into Coin Slot 2.
● TOTAL COINS: The total number of coins inserted into the coin slots.
● COIN CREDITS: The number of credits for the coins inserted.
● SERVICE CREDITS: The number of credits input by the SERVICE Button.
● TOTAL CREDITS: Total credits from coins and the SERVICE Button
Press the TEST Button to display the next screen.