「
Mushiking#3-eng.doc
」
最終印刷日時：
2010/01/14 14:19:00
15/17
--------------------------------------------------------------------------------------------------------
The connector is not connected properly.
Ensure proper connection.
--------------------------------------------------------------------------------------------------------
Not set to game mode.
Change setting to game mode.
-------------------------------------------------------------------------------------------------------------------
CIRCUIT PROTECTOR
The Circuit Protector uses a bimetal to break the circuit. Due to the heat, the machine cannot be restarted
until it cools. Wait at least 1 minute before restarting. (Press the button in.)
1) CIRCUIT PROTECTOR
(P. 57)
18. GAME BOARD
[!] WARNING
●
In order to prevent electric shock and short circuit, be sure to turn power off
before working on the machine.
●
Be careful not to damage wiring. Damaged wiring may cause electric shock
or short circuit.
●
Do not expose the Game Board, etc. for no reason. Failure to observe this can
cause electric shock or malfunctioning.
[!] CAUTION
●
There is no need to handle the Game Board for this machine since all setting
changes are done in TEST MODE. Failure to use the Game Board or any other IC
board as shipped can cause electric shock or malfunctioning.
●
The chip components on IC boards can be damaged by electrostatic
discharge from the human body. Before handling an IC board, always neutralize
any static charge in the body by touching a grounded metal surface.
18-1 REMOVING THE GAME BOARD
This machine uses the NAOMI Board. When submitting for exchange or repair, remove the ASSY MAIN
BOARD from the cabinet and detach the NAOMI board according to the following procedures.
1. Turn off the main AC unit power switch and open the service door.
1
