「
Mushiking#2-eng.doc
」
最終印刷日時:
2010/01/14 14:18:00
5/17
(P. 32)
10. EXPLANATION OF TEST AND DATA DISPLAY
By operating the TEST and SERVICE Buttons on the maintenance switch unit, periodically perform tests
and data check. When installing the machine for the first time, collecting cash, or when the machine does
not function correctly, perform a machine check in accordance with the explanations given in this section.
The following shows tests and modes that should be utilized as applicable.
This product's basic system consists of the NAOMI game board. The system enables you to play several
games one after the other just by changing a ROM board case that is to be set on the NAOMI case.
The product, therefore, supports the following 2 test modes:
(1) System test mode for an automatic self-diagnostic test (generally used by every product that contains
the basic system) and for a coin assignment (specifically used by this product) and
(2) Game test mode for testing the input/output control devices and setting the difficulty level (specifically
used by this product).
This manual does not cover the automatic self-diagnostic test. For more information about the system test
mode, see the attached NAOMI Service Manual.
TABLE 10 EXPLANATION OF TEST MODE
------------------------------------------------------------------------------------------------------------------------
ITEMS
DESCRIPTION
REFERENCE SECTIONS
------------------------------------------------------------------------------------------------------------------------
INSTALLATION OF MACHINE
When the machine is installed, perform the following:
1. Check to ensure each setting is the standard setting at shipment.
S/M* & 10-2
2. Check each Input equipment in the INPUT TEST mode.
10-3 (2), (4)
3. Check each Output equipment in the CARD DISPENSER TEST mode.
10-3 (5)
4. Test on-IC-Board IC's in the self-test mode.
S/M*
------------------------------------------------------------------------------------------------------------------------
MEMORY TEST
This test is automatically executed by selecting RAM TEST or ROM BOARD TEST in the Menu mode.
S/M*
------------------------------------------------------------------------------------------------------------------------
PERIODIC SERVICING
Periodically perform the following:
1. Run Memory Test.
S/M*& 10-2
2. Ascertain each setting.
—
3. Test each Input equipment in the INPUT TEST mode.
10-3 (2), (4)
4. Test each Output equipment in the CARD DISPENSER TEST mode. 10-3 (5)
------------------------------------------------------------------------------------------------------------------------
CONTROL SYSTEM
1. Check each Input equipment in the INPUT TEST mode.
S/M* & 10-3
2. Adjust or replace each Input equipment.
10-3 (2), (4), (5)
3. If the problem still persists, check each equipment's mechanism movements.