Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES, Owner'S Service Manual

Page: 44 / 171

ASSEMBL
Y AND
INST
ALLA
TION
31
6
• Make sure that all the adjusters contact the floor. Otherwise the cabinet could
move, causing an accident.
• Provide a ventilation space at least 15cm wide behind the cabinet. There are
ventilation holes on the back of the cabinet. Do not block the ventilation holes.
Doing so could trap heat inside resulting in fire. It could also result in equipment
damage or cause parts to become exhausted prematurely.
• Do not position the product on uneven surfaces or a surface which slopes.
Positioning the cabinet on either an uneven or sloped surface may cause the
cabinet to become unstable which may result in damage or injury.
6-5 INSPECT FIXATION TO SITE
The product comes with castors attached to 6 locations. When the installation site has been determined, have the ad -
justers come in direct contact with the floor. Establish a gap of approximately 5mm between the floor and the castor
and adjust the unit so that it will remain level.
ADJUSTER (2)
ADJUSTER (2) ADJUSTER (2)
ADJUSTER (2)
CASTOR (6)
1
Once the leg levellers are down and in position the cabinet can not be moved. Trying to move the cabinet
when the levellers are down may cause damage to the product or cause personal injury. Minor adjustments
to position can be made if the levellers are raises and the casters come into contact with the floor. Do not
attempt to move the cabinet over long distances with the floor attached.
2
Bring the adjusters into direct contact with the floor. Use a wrench to align the height of the adjusters until
the cabinet is perfectly level. Not having the adjusters level will cause the cabinet to rock and move from
position..