Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES, Owner'S Service Manual

Page: 104 / 171

ACTIVE
FLOOR
ASSY
13
91
1
Remove the power from the machine and disconnect the mains input connector from the wall socket.
2
Remove the (7) M4x12 SKT CAP SCR from the side of the FLOOR PLATE SENSOR.
3
Locate the sensor to be changed (in this case it is sensor 6). Disconnect the connector relevant to the Sensor
to be changed.
4
Remove the single fixing which secures the Jump Sensor to the Side Frame L.
M4x12 SKT CAP SCR (7)
029-B00412
Disconnect the connector
YL3P
Jump Sensor #6
SIDE FRAME L
PLATE FLOOR SENSOR L
MSR-3003UK
M3 × 12
370-5173-01
Jump Sensor #6 Jump Sensor Plate
Lens Hole
Lens Lens
Always align the lens of the Jump Sensor with
the Lens Hole.
When Changing Jump Sensors, it is advisable
to change both L & R sensors.