Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES Owner'S Service Manual Download Page 1

Page: 1 / 171

IMPORTANT

• Before using this product, read this manual carefully to understand the

contents herein stated.

• After reading this manual, be sure to keep it near the product or in a

convenient place for easy reference when necessary.

OWNER'S & SER

VICE MANUAL

420-0025-01UK

MARIO & SONIC at the RIO 2016 OL

YMPIC GAMES

Sega Amusements International Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.

Telephone: +44 (0) 208 391 8090 Facsimile:

+44 (0) 208 391 8099

email: [email protected]

Web: http://www.segaarcade.com

Sega Corporation

Canal Side Bldg 1-39-9 Higashi-shinagawa Shinagawa-ku, Tokyo, 140-8583, Japan.

Telephone: +81-3-687-7133

Facsimile:

+81-3-687-7134

Errors and omissions excepted (E&OE)

PRINTING

March 2016

OWNER’S & SERVICE MANUAL

Summary of Contents for MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES












































































































































































Search results

Summary of Contents for MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES

Reviews:

Related manuals for MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES

Brands by name

Popular brands

Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES, Owner'S Service Manual

Search results

Summary of Contents for MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES

Reviews:

Related manuals for MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES

Brands by name

Popular brands