Sega House Of The Dead 3 DELUXE Service Manual Download

Page: 71 / 111

5.3.4.1.GUN MARK CHECK

This item checks gun sights.

Select GUN MARK CHECK on the Gun Setting screen and press the TEST Button.

(1P Gun cross)

This is displayed when the gun is pointed at the screen. 1P is red.

(2P Gun cross)

This is displayed when the gun is pointed at the screen. 2P is blue.

"OUT OF SCREEN" is displayed when the gun cross is perceived to be out of screen.

Pointing the gun at the screen displays the gun cross (sight) for that gun. You can check to see if the sight
lines up properly at this screen.

Press the TEST Button when everything has been checked. You will return to the Gun Setting screen.

Summary of Contents for House Of The Dead 3 DELUXE
















































































































Search results

Summary of Contents for House Of The Dead 3 DELUXE

Reviews:

Related manuals for House Of The Dead 3 DELUXE

Brands by name

Popular brands

Sega House Of The Dead 3 DELUXE, Service Manual

Search results

Summary of Contents for House Of The Dead 3 DELUXE

Reviews:

Related manuals for House Of The Dead 3 DELUXE

Brands by name

Popular brands