Sega House Of The Dead 3 DELUXE, Service Manual

Page: 65 / 111

62
(C) CLEAR NETWORK SETTING
Use this to return all values in the NETWORK SETTING to the default values and turn off network
communication.
To clear data, use the SERVICE Button to move the cursor to YES (CLEAR) and press the TEST Button.
When the data has been cleared, the message "COMPLETED" is displayed.
Press the TEST Button again to return to the NETWORK SETTING main screen.
Move the cursor to NO (CANCEL) and press the TEST Button to return to the NETWORK SETTING main
screen without clearing the data.
NETWORK TEST
In this test, the checking for the communication network can be performed.
Entering this test mode, checking starts immediately.
The display changes to "GOOD" when the checking is finished successfully, and changes to "BAD" when
any problem is detected. If the connection is not permitted, the display will change to "N/A".
If you perform this test immediately after the setting change, it may not display the correct result. In this
case, be sure to turn the power off and on, and enter this test mode again.