Sega House Of The Dead 3 DELUXE, Service Manual

Page: 22 / 111

19
3.8.3.1.WIRING CONNECTIONS.
COIN MECH LOOM INSTALLATION
C220B LM1006IDC
LM1006LAMP-0.1
·
Attach the lamp holder to the bracket on the coin return
button.
· Attach one 15-way connector to the C220 coin mech.
· Attach the other 15-way connector to Validator A on the
credit board.
·
Attach the 2-way connector to ‘LAMP’ on the VTS board.
GENERIC
MECHANICALS LM1008
LM1008-LAMP ·
Fit the two lamp holders behind the coin return buttons.
· Attach the blue cable and orange cable to one mech’s
microswitch switch.
·
Attach the blue/green cable and orange/green cable to the
other mech’s microswitch.
·
Attach the 2-way mate and lok plug to the 2-way mate and
lok cap provided.
· Attach one 15-way connector to Validator A and the other
to Validator B on the credit board
MARS MS111B1
MARS ME115 LM1007
LM1008-LAMP · Fit the lamp holder to the bracket behind the coin return
button.
·
Fit one of the 13-way connectors to the coin mech.
· Fit the other 13-way connector to Validator A on the credit
board. Note the 13-way connector is keyed and this key
must coincide with the key on the credit board.
SECI, C120, SR3 OWN LOOM AND
LM1006LAMP-0.1 · Attach the lamp holder to the bracket on the coin return
button.
·
Attach the 2- connector to ‘LAMP’ on the VTS board.
· Attach the validator’s own loom to position A on the credit
board
VTS credit board assembly